MHi-SNO Timbersled Accessories




                   
    
          
    
  

  
                 
Mountain Horse Accessories

Timbersled Mountain Horse Logo OGIO Jacket
  • Top quality OGIO Jacket
  • 100% poly interlock bonded to 12-ounce, 100% poly micro-fleece debossed OGIO at back neck
  • Welded zippered chest pocket with OGIO zipper pull
  • Open hem with drawcord and toggles
  • Mens is 1/4 Zip OGIO Torque
  • Mens Sizes S, M, L, XL, XXL, XXXL
  • Womens is Full Zip OGIO Minx
  • Womens Sizes S, M
  • Mountain Horse Logo on the front
MH OGIO Mens Black Jacket $80.00


MH OGIO Mens Gray Jacket $80.00


MH OGIO Mens Blue Jacket $80.00

Out of Stock
MH OGIO Womens Black Jacket $80.00

Out of Stock
MH OGIO Womens Gray Jacket $80.00

Out of Stock
MH OGIO Womens Blue Jacket $80.00

Out of Stock


10" T/S BackCountry Ski

The ski on the Mountain Horse is called the T/S (Timbersled/Simmons) BackCountry Ski. It is a custom designed and built tri-keel ski that is like no other ski in the snowmobile or snow bike industry. It is the only ski in history that is specifically designed for snow biking. The ski is built by Simmons, Inc. and has been designed by Timbersled. It has some similarities to some of the other Simmons skis but has a totally different function that is specific to the handling needs of a snow bike. It is an all-in-one ski eliminating the need to change it for different snow conditions (this is something that has been a real issue for snow bikes until this ski was produced).

  • 10" wide with 3 keels that allow for precision handling and best possible flotation in the powder.
  • The center keel is wider, taller and shorter in length than the 2 outer keels with a 6" long skag that allows for easy steering on the trail and a roll center that feels a lot like a tire.
  • Outside keels are only 3/4" wide and are a 1" shorter than the center keel. They are located to the very outer edge of the ski so they provide super secure feeling when side hilling and cornering.
  • 3-1/2" of space in-between keels. This allows enough space to prevent freezing or plugging up with snow.
  • With the combination of the center keel being taller than the outers, when you lean or side hill you are always on 2 keels. This allows the ski to track very straight without darting and provides very easy steering in most conditions.
  • Front outer edge of the ski has a 1/4" tall ledge leading from the front of the outer keels to the ski-loop. This makes the ski respond instantly in soft snow when you steer into a side hill with out slipping out to the side.
  • Front leading edge of the 2 outer keels are farther forward of the leading edge of the center keel. This adds steering responsiveness and eliminates front end push in soft snow.
  • Straight cut grooves in the bottom of the ski that extend full length and are 1/2" apart. This helps with straight line tracking on set up snow conditions such as on the trail and in wet snow.
  • 3 mounting positions for the ski saddle. This allows you to position the ski forward or backward to change the steering characteristics.
  • All 3 ski skags are inserted with carbide down the full length of each skag so they will last a long time. The back half of the skags have 60 deg carbides that stick out for stability on ice and make the ski track straighter.
10" T/S BackCountry Ski $425.00
16-SB-946


Dual Track Center Skag

This new skag allows the 10" TS Backcountry ski to track 50% better than before. It allows you to ride down the trail with the comfort of no darting or shiftiness that has given the snow bike a bad reputation on the trail in the past.

MH Dual Track Skag $100.00
16-WP-825



All/Terrain Wheel Kit

This unique Wheel system is designed specifically for snow bikes (fits all snow bike brands), it will make moving your snow bike completely hassle free. The front wheel securely attaches to the ski and is tightened down with a ratchet strap. The back wheel simply sits down into the lugs of the track and self aligns. The system can be installed in a few seconds allowing you to easily push your bike around on any surface without it tipping over. You can also use them to push your snow bike up a ramp into a truck bed and/or to ride your snow bike in and out of the trailer or down a gravel roads that has no snow on it.

  • Kit is manufactured by Timbersled Products Inc.
  • Kit is constructed of 15 CNC machined billet aluminum parts
  • Uses 8" treaded tires that inflate to 50 psi
  • Uses high quality composite rims with dual high speed sealed bearing
  • Custom made super strong ratchet strap tie down system
  • This wheel system is extremely over built and will give you years of satisfying use
MH All/Terrain Wheel Set $450.00
16-SB-001
Out of Stock


LT Snow Flap Assembly
  • This snow flap will fit all previous model LT MH kits
  • Easily mounts on the back of the tunnel
  • Stops the spraying snow that comes off the back side of the kit when climbing
LT Snow Flap Assembly $70.00
16-PA-013




Frame and/or Tunnel Cargo Bag

This bag is one of the most commonly used on the Mtn. Horse snow bike system. It can be mounted in two different locations. It can be mounted to the the top of the tubular sub frame. It can also mounted on the back of the tunnel behind the gas can if you have one of those. The top of the tunnel is pre drilled for the bag in this location and will fasten down with supplied hardware.

  • Bag is manufactured by Skinz Protective Gear and is designed specifically for the Mtn. Horse snow bike
  • Constructed of a strong non absorbent material with sealed stitching
  • Uses smooth action water proof zipper
  • Bag has a rigid base that protects the bag from ware and tare and helps to hold it's shape when loaded down
  • Bag will hold up to five 12oz. cans or four 16oz. water bottles along with other items on top of them
Frame/Tunnel Cargo Bag $75.00
16-SB-004



Handle Bar Cargo Bag

This bag is most commonly used on Motocross bikes that do not have a headlight. To mount it on the bike you remove the front number plate and replace it with the bag. It simply straps on around the fork tubes and the handlebar clamps. It works perfect for your lunch and a dry set of gloves. The bag is easy to take on and off, so that you can take it into the house for restocking at the end of your ride.

  • Bag is manufactured by Skinz Protective Gear for the Mtn. Horse snow bike but will work well for all types of dirt biking
  • Constructed of a strong cordura with laminated padding inside the bag
  • Uses smooth action water proof zipper
  • Quick release buckles for easy on and off use
Handle Bar Cargo Bag $60.00
16-SB-005




Large Tunnel Trunk / Bag

This bag is more like a trunk in your car, it is very large and works well for carrying everything you can think of. It mounts to a track system that bolts to the the tunnel in factory pre drilled hole located on the top of the tunnel. This is the same mounting position and mounting track that is used for the 3.3 gal. gas can. Once the track is mounted you can simply slide the unit on and off the track with no other straps needed to hold it.

With this system you can use the bag or the gas can on the same track or if you choose to have both then the bag can be mounted behind the gas can with a second set of mounting track. The bag has rigid bottom and side, with a soft zip down top so it will form to it's contents. It also has elastic bands on top so that you can hold other things on the outside of it.

  • Bag is manufactured by Mountain Addiction and is custom tailored to fit the Mtn. Horse snow bike
  • Constructed of a 1 peace molded plastic base and sides
  • Has a cordura cover and top lid sewn into it
  • Uses smooth action water proof zipper
  • Price includes mounting track
Large Tunnel Trunk/Bag $220.00
16-SB-008





3.3 Gallon Tunnel Mount Gas Can

This can mounts to a track system that bolts to the tunnel in factory pre drilled hole located on the top of the tunnel. This is the same mounting position and mounting track that is used for the tunnel trunk/bag. Once the track is mounted you can simply slide the unit on and off the track with no other straps needed to hold it. With this system you can use the gas can or bag on the same track or if you choose to have both then the bag can be mounted behind the gas can with a second set of mounting track.

  • Gas Can is manufactured by Mountain Addiction and is custom tailored to fit the Mtn. Horse snow bike
  • Holds 3.3 gallons
  • Uses a self venting nozzle with no extra vent that can cause leaking
  • Constructed of molded plastic
  • Comes in black only
  • Price includes mounting track
3.3g Tunnel Mount Gas Can $135.00
16-SB-009



1.3 Gal Gas Can & Small Cargo Bag Combo w/ Rack

This can and bag mount to a track system that bolts to the tunnel in factory pre drilled hole located on the top of the tunnel. Once the track is mounted you can simply slide the units on and off the track with no other straps needed to hold them.

  • Gas Can and bag are manufactured by Mountain Addiction and is custom tailored to fit the Mtn. Horse snow bike
  • Holds 1.3 gallons - 9.75" L x 6" W x 9" H
  • Uses a self venting nozzle with no extra vent that can cause leaking
  • Constructed of molded plastic
  • Constructed of a 1 peace molded plastic base and sides
  • Has a cordura cover and top lid sewn into it
  • Uses smooth action water proof zipper
  • Comes in black only
  • Price includes mounting track
1.3g Gas Can & Sm Cargo Bag Combo $210.00
16-SB-007



Mini Shop Hoist

This super strong hoist was designed to best fit power sports machines such as snow bikes and snowmobiles along with other things. It is intended for any shop that needs to easily and often lift the back of a sled or lift a snow bike while balancing it from tipping over. It makes a excellent warm up stand and is perfect for doing maintenance or removing a suspension to do a track swap and can even lift a motor out of a sled or bike.

  • 400 lb. lifting capacity
  • Lifting height with strap attached is 20" to 48"
  • Extendible boom with 8" of adjustment
  • Two sided lifting hook for better balance
  • Lifting strap included
  • 2 locking casters
  • Set down bar so that you can utilize the hoist as a track dolly
  • Steel frame construction with black powder coat finish
Mini Shop Hoist $400.00
16-SB-010



Mountain Horse Pre Filter
  • Stops snow and dust
  • Water repellant
MH Pre Filter $25.00
16-PP-930



5 Foot Brake Line

This 5 foot long brake line allows you to connect your stock hand brake lever and master cylinder to the snow bike brake caliper.

MH 5 Foot Brake Line $85.00
16-PP-900



Timbersled Mountain Horse Logo Hat
  • 4 Styles to choose from
  • Embroidered Logo on the front
  • Prewashed for a snug fit
  • Adjustment strap in the back
Mountain Horse Hat $15.00




Timbersled Mountain Horse Logo T-Shirt
  • Top quality T-Shirt
  • Adult M, L, XL, XXL
  • Small Logo on the front
  • Large Logo on the back
Mountain Horse T-Shirt $20.00

Welcome MHi L.L.C.  is you Minnesota Timbersled  Mountain Horse Snow Bike  Dealer in the Upper MidWest.MHi L.L.C. DBA MHi-SNO.com is you Timbersled Mountain Horse Snow Bike Dealer. MHi offers new Timbersled Mountain Horse products from ST kits, LT kits, and the SX kit. MHi also offers sales of Mountain Horse Replacement Parts. Along with the sale of Mountain Horse Kits and Parts MHi sells Used Timbersled Mountain Horse Snow Bike Kits and Mountain Horse Bikes for sale. At MHi we strive to achieve one goal, customer satisfaction. We do this by providing quality products, with quality service, while making sure our customers are never left unsatisfied. At MHi we have a great products that will be able to meet your needs. Timbersled Mountain Horse Snow Bike Kit 's are well designed and offers a Full workmanship warranty & satisfaction guarantee on all products! MHi is here to help the customer with any questions about snow biking, service and sales of  Mountain Horse Snow Bike products. MHi also offers Demo rides  to interested parties.   Comfortably browse our website  MHi-SNO.com  for the Timbersled Mountain Horse Snow Bike kit that is right for you and pick out the accessories  you desire and contact us for ordering details . MHi and Timbersled Mountain Horse Snow Bike are eager to serve and standing by. Our knowledgeable and professionally trained Team members makes the difference between just buying a  Snow Bike, and buying a Timbersled Snow Bike with a dedicated and friendly Team behind it, ready to serve all your winter biking needs. Take comfort in knowing our relationship with you doesn't end when you drive away with your new kit. At MHi  our belief is SERVICE AFTER THE SALE. Every customer is a relationship we value and strive to keep for life.     MHi L.L.C. DBA MHi-SNO.com  in Minnesota - Trusted Dealer for Timbersled Products , Mountain Horse Snow Bikes , and Snow Bike Service. MHi also sells Timbersled Mountain Horse Snow Bike Kits to Michigan, North Dakota, South Dakota, Iowa, Wisconsin, New York, Maine, New Mexico, Nebraska, Wyoming, Nevada, Utah, Colorado, California, Arizona.  We are excited you are visiting our MHi web site!  See what our customers are saying about our products in Customer Reviews  on the Timbersled Snow Bike reviews.